Components

Home
Components

Comprehensive fluid handling from A to Z

From suppling and feeding to the perfectly dosed and controlled dispensing of viscous media: Thanks to the intercompatibility and modularity of our components, we offer you an extensive range of products covering the entire dosing process chain.

Our standardized and tried-and-tested components offer maximum flexibility and cost-effectiveness. All components can be configured individually and according to specific requirements. Thanks to robust materials that reduce wear and tear and maintenance costs, those components work reliably and precisely in a wide variety of industries, even under difficult conditions. They can be used both to build new systems and to extend existing ones.

Supplying & Feeding

Transfer & Treatment

Processing & Application

Instrumentation & Control

Filter

Walther Systemtechnik GmbH

FL - flat jet cap
RU - round jet cap
SI - marking jet cap

02 - 2,0 liter
05 - 5,0 liter
12 - 12,0 liter
25 - 25,0 liter
40 - 40,0 liter

1 - EURO 1 (plastic cartridge)
2 - EURO 2 (aluminium/zinc cartridge)

14 - 14 [Gauge]
15 - 15 [Gauge]
16 - 16 [Gauge]
17 - 17 [Gauge]
18 - 18 [Gauge]
19 - 19 [Gauge]
20 - 20 [Gauge]
21 - 21 [Gauge]
22 - 22 [Gauge]
23 - 23 [Gauge]
25 - 25 [Gauge]
26 - 26 [Gauge]
27 - 27 [Gauge]
28 - 28 [Gauge]
30 - 30 [Gauge]
32 - 32 [Gauge]

002 - up to 0,02 [cm³]
600 - 1,0 to 6,0 [cm³]
020 - 0,01 to 0,2 [cm³]
200 - 0,1 to 2,0 [cm³]

1/8 - G 1/8
1/4 - G 1/4
3/8 - G 3/8
1/2 - G 1/2
3/4 - G 3/4
1 - G 1

S64 - plug-in connection 6/4

S10 - standard spray nozzle up to Ø = 1.0 [mm]
S20 - standard spray nozzle from Ø = 1.2 to Ø = 2.0 [mm]
S25 - standard spray nozzle Ø = 2.5 [mm]

90 - 90 [°C]

000025 - 0,025 [cm³]

04 - DN4
06 - DN6
08 - DN8
10 - DN10
12 - DN12
16 - DN16

04 - DN4
06 - DN6

06 - DN6
08 - DN8
10 - DN10
12 - DN12

LV - long dosing nozzle
LL - adapter Luerlock
G8 - adapter G 1/8"

02S01 - 2 pole, shielded
03U01 - 3 pole, unshielded
04U01 - 4 pole, unshielded
04S01 - 4 pole, shielded
05U01 - 5 pole, unshielded
06U01 - 6 pole, unshielded
08U01 - 8 pole, unshielded

03 - 3 outlets
04 - 4 outlets
08 - 8 outlets

04 - 4 pcs.

10 - 1 [mm]

230AC - 230 [VAC]
24DC - 24 [VDC]

06 - M12x1.5
08 - M14x1.5
10 - M16x1.5
12 - M18x1.5
15 - M22x1.5
18 - M26x1.5
22 - M30x2.0

06 - M12x1.5
08 - M14x1.5
10 - M16x1.5
12 - M18x1.5
14 - M22x1.5
15 - M22x1.5 (L)
16 - M24x1.5
18 - M26x1.5
20 - M30x2.0 (S)
22 - M30x2.0 (L)

06 - M12x1.5
08 - M14x1.5
10 - M16x1.5
12 - M18x1.5
15 - M22x1.5
18 - M26x1.5
22 - M30x2.0

06 - inside: M12x1.5 | outside: G 1/4
08 - inside: M14x1.5 | outside: G 1/4
10 - inside: M16x1.5 | outside: G 1/4
12 - inside: M18x1.5 | outside: G 3/8
15 - inside: M22x1.5 | outside: G 1/2
18 - inside: M26x1.5 | outside: G 1/2
22 - inside: M30x2.0 | outside: G 3/4

25 - 25:1

F - FKM
E - EPDM
I - Isolast
PE - UHMWPE

1 - max. container size Ø435 x 445 [mm]
2 - max. container size Ø460 x 695 [mm]
3 - max. container size Ø642 x 950 [mm]

2 - max. container size Ø435 x 680 [mm]
3 - max. container size Ø617 x 930 [mm]

1428 - inch (internal and external heaxagon socket)
1462 - inch (hexagon socket)
1463 - metric

02 - 2 [TE]
03 - 3 [TE]
04 - 4 [TE]
05 - 5 [TE]
06 - 6 [TE]
07 - 7 [TE]
08 - 8 [TE]
09 - 9 [TE]
10 - 10 [TE]
11 - 11 [TE]
12 - 12 [TE]
13 - 13 [TE]
14 - 14 [TE]
15 - 15 [TE]

for WKF | 1 kg container
for WKF | 5 kg container
for WPS-1 BASIC & ADVANCED | container volume = 10 to 50 [l]
for WPS-2 BASiC & ADVANCED | container volume = 10 to 50 [l]
for WPS-3 BASIC & ADVANCED | container volume < 180 [l]
for WPS-3 BASIC & ADVANCED | container volume >= 180 [l]

MPP01 - for pulse valve MPP-01
MPP03 - for pulse valve MPP-03
SPEED - for pulse valve MPP-SPEED

A - analog-ratiometric

005 - 5 [bar]
010 - 10 [bar]
025 - 25 [bar]
050 - 50 [bar]
100 - 100 [bar]
160 - 160 [bar]
200 - 200 [bar]
250 - 250 [bar]
400 - 400 [bar]

K1 - for spray valve SMS-20
K2 - for spray valve SMS-02 or SMS-22
K3 - for spray valve SMS-04 (without needle stroke adjustment SMS-04-x-N-x-xxx-xx-xxx-xxxxx)
K4 - for spray valve SMS-04 (with needle stroke adjustment SMS-04-x-R-x-xxx-xx-xxx-xxxxx)
K5 - for spray valve WSV

01 - for valve SMS-02, SMS-20 and SMS-22
02 - for valve MPP-01 and VMS-02
03 - for valve MPP-03

for valve SMS-02 and SMS-22
for valve SMS-20
for valve SMS-04
for valve MPP-01, MPP-03 and VMS-02

D - dosing valve
P - pulse valve
S - spray valve

01 - for valve WDV
03 - for Valve SMS-02, SMS-04, SMS-20, SMS-22, MPP-01, MPP-03 and VMS-02

22 - 2/2 way-valve

32 - 3/2 way-valve

01 - for pulse valve MPP-01
03 - for pulse valve MPP-03

M12FA - circular connector M12, female, angled (90°)
M08MS - circular connector M8, male, straight
M08MA - circular connector M8, male, angled (90°)
M08FS - circular connector M8, female, straight
M08FA - circular connector M8, female, angled (90°)
M12MS - circular connector M12, male, straight
M12ma - circular connector M12, male, angled (90°)
M12FS - circular connector M12, female, straight

25W - 25 [W]

02 - G 1/8
04 - G 1/4
05 - M5
06 - G 3/8

2000 - 2000 [cm³]

1/8 - G 1/8
1/4 - G 1/4
3/8 - G 3/8
1/2 - G 1/2
3/4 - G 3/4

08 - 8°
15 - 15°
45 - 45°
60 - 60°
90 - 90°

005 - 0,5 [m]
010 - 1,0 [m]
015 - 1,5 [m]
020 - 2,0 [m]
030 - 3,0 [m]
040 - 4,0 [m]
050 - 5,0 [m]

014 - 1/4" | 6,35 [mm]
012 - 1/2" | 12,7 [mm]
100 - 1" | 25,4 [mm]
112 - 1 1/2" | 38,1 [mm]
000 - not specified

10 - 0 to 10 [bar]

K - cubic
F - flat

L - light

without sensor (for SMS-04 = regulating screw)
with sensor

R - with sensor
N - without sensor

3500 - 3,500 [mA]
6000 - 6,000 [mA]
12000 - 12,000 [mA]

03 - 0,30 [mm]
05 - 0,50 [mm]
08 - 0,80 [mm]
10 - 1,00 [mm]
20 - 2,00 [mm]
25 - 2,50 [mm]

STD - standard spray nozzle
KLS - KLS spray nozzle
SIG - marking spray nozzle

02 - 2 modules
03 - 3 modules
04 - 4 modules
05 - 5 modules
06 - 6 modules
07 - 7 modules
08 - 8 modules

H - horizontal
V - vertical

S64 - plug-in connection 6/4

060 - 6,0 [mm]

HD - 5 to 200 [bar]

G18 - G 1/8" external thread
G14 - G 1/4" external thread

06 - M12x1.5
08 - M14x1.5
10 - M16x1.5
12 - M18x1.5
15 - M22x1.5
18 - M26x1.5

E - EPDM
F - FKM
P - PTFE/FEP

F - flat

B - BASIC
A - ADVANCED
P - PROFESSIONAL

N - Standardausführung

HDS - high pressure hose rigid

HDF - high pressure hose flexible

ND - low pressure flexible

GE - straight connection
GES - straight adjustable connection
EVW - adjustable screw joint angled
G - straight screw connection
GR - straight reducing srew connection
VS - locking srew inch

N - not installed

M08MS - circular connector M8, male, straight
M08MA - circular connector M8, male, angled (90°)
M12MS - circular connector M12, male, straight
M12FS - circular connector M12, female, straight
M12FA - circular connector M12, female, angled (90°)
OEOE - open cable end

A - 4 to 20 [mA]
V - 0 to 10 [V]

S2 - 2 switching points
A1 - 4 to 20 [mA] | 1 switching point
V1 - 0 to 10 [V] | 1 switching point
A2 - 4 to 20 [mA] | 2 switching points
V2 - 0 to 10 [V] | 2 switching points

02 - 4/2
04 - 6/4
06 - 8/6
08 - 10/8

14 - G 1/4"
38 - G 3/8"
12 - G 1/2"

0050 - 50 [mm] - standard length
0100 - 100 [mm] - standard length
LLLL - customized length - 35 [mm] to 400 [mm]

01 - standard spray nozzle (STA/STD)
02 - KLS spray nozzle (KLS)
05 - marking spray nozzle (SIG)

PT - PTFE

PA - PA

PA - PA
PU - PUR
PT - PTFE

084 - 84 [µm]
150 - 150 [µm]
320 - 320 [µm]
510 - 510 [µm]

4 - speroidal graphite iron, carbide bearing, incresed play
5 - stainless steel, carbide bearing, increased play
6 - stainless steel, ball bearing (small play)

L - light

L - left valve side
R - right valve side
LR - left and right valve side

03 - 0,30 [mm]
05 - 0,50 [mm]
08 - 0,80 [mm]
10 - 1,00 [mm]
15 - 1,50 [mm]
20 - 2,00 [mm]
25 - 2,50 [mm]

010 - 0,10 [mm]
015 - 0,15 [mm]
030 - 0,30 [mm]
045 - 0,45 [mm]
060 - 0,60 [mm]
N00 - without nozzle

01 - 1 [pc]
02 - 50 [pcs.]

S - sideward (90° to spraying axis)
R - rearward (180° to spraying axis)

25 - 25:1

4579 - 45:1 | 79 [cm³]

ED - elastic sealing

01 - without spring support
02 - with spring support

1/8 - G 1/8
1/4 - G 1/4
3/8 - G 3/8
1/2 - G 1/2
3/4 - G 3/4

06 - M12x1,5
08 - M14x1,5
10 - M16x1,5
12 - M18x1,5
15 - M22x1,5
18 - M26x1,5
22 - M30x2,0

NC - normally closed
NO - normally open

T-NC - normally closed (T variant)
T-NO - normally open (T variant)

KOR - konus reduction
RI - reduction

STD - standard (ceramic)

01 - for valve SMS-02, SMS-20 and SMS-22
04 - for valve SMS-04
05 - for valve WDV-200-HD and WDV-600-HD
06 - for valve MPP-03
07 - for valve MPP-01 and VMS-02

01 - with Display

N - non-flammable media
B - flammable media

A - 230 [VAC]
B - 24 [VDC]

000 - without filler unit
150 - filler unit 150 [µm]
300 - filler unit 300 [µm]
500 - filler unit 500 [µm]

0050 - 0,5 [m]
0060 - 0,6 [m]
0070 - 0,7 [m]
0080 - 0,8 [m]
0090 - 0,9 [m]
0100 - 1,0 [m]
0110 - 1,1 [m]
0120 - 1,2 [m]
0130 - 1,3 [m]
0140 - 1,4 [m]
0150 - 1,5 [m]
0160 - 1,6 [m]
0170 - 1,7 [m]
0180 - 1,8 [m]
0190 - 1,9 [m]
0200 - 2,0 [m]
0250 - 2,5 [m]
0300 - 3,0 [m]
0400 - 4,0 [m]
0500 - 5,0 [m]
0600 - 6,0 [m]
0700 - 7,0 [m]
0800 - 8,0 [m]
1000 - 10,0 [m]

0050 - 0,5 [m]
0100 - 1,0 [m]
0150 - 1,5 [m]
0200 - 2,0 [m]
0250 - 2,5 [m]
0300 - 3,0 [m]
0400 - 4,0 [m]
0500 - 5,0 [m]
0600 - 6,0 [m]
0700 - 7,0 [m]
0800 - 8,0 [m]

05 - 5,00 [m]
10 - 10,00 [m]

130 - 130 [mm]
288 - 288 [mm]
473 - 473 [mm]
845 - 845 [mm]

003 - 0,3 [m]
006 - 0,6 [m]
008 - 0,8 [m]
010 - 1,0 [m]
020 - 2,0 [m]
030 - 3,0 [m]
050 - 5,0 [m]
100 - 10,0 [m]

0205 - from 0.20 to 0.50 [mm]
0210 - from 0.20 to 1.00 [mm]
0810 - from 0.80 to 1.00 [mm]
1215 - from 1.20 to 1.50 [mm]
1820 - from 1.80 to 2.00 [mm]
2500 - 2.50 [mm]

L - light
S - heavy

10 - 1,00 [mm]

1 - 1 hose parallel
2 - 2 hoses parallel

14 - G 1/4"
38 - G 3/8"

25 - 0 to 2,5 [bar]
45 - 0 to 4,5 [bar]
60 - 0 to 6,0 [bar]

T00 - boring on top with plug
R00 - boring on the right with plug
L00 - boring on the left with plug
N00 - no boring

N00 - not installed

S - Standard
I - for media containing isocyanate

F - FKM
E - EPDM

ED - elastic sealing

CNI - Type of connector

00 - with union nut
KÖ - without union nut

M - manually

00000 - without follower plate
FP100 - follower plate Ø300 [mm]
FP101 - follower plate Ø344 [mm]
FP102 - follower plate Ø405 [mm]
FP103 - follower plate Ø430 [mm]
FP104 - follower plate Ø586 [mm]
FP201 - follower plate Ø103 [mm]
FP202 - follower plate Ø200 [mm]
FP203 - follower plate Ø245 [mm]
FP204 - follower plate Ø175 [mm]

03 - 0.3 [mm]
05 - 0.5 [mm]
08 - 0.8 [mm]
10 - 1.0 [mm]
15 - 1.5 [mm]
20 - 2.0 [mm]
25 - 2.5 [mm]
00 - without needle and nozzle

00 - straight 0° | straight 0°
01 - straight 0° | angle 45°
02 - straight 0° | angle 90°
11 - angle 45° | angle 45°
12 - angle 45° | angle 90°
22 - angle 90° | angle 90°

2500 - rolled goods 25 [m]

WA03 - spraying at an angle of 135°, 0,30 [mm]
WA05 - spraying at an angle of 135°, 0,50 [mm]
WA08 - spraying at an angle of 135°, 0,80 [mm]
WA10 - spraying at an angle of 135°, 1,00 [mm]

00 - without pulse nozzle
02 - standard 0.2 [mm]
03 - standard 0.3 [mm]
05 - standard 0.5 [mm]
08 - standard 0.8 [mm]
10 - standard 1.0 [mm]

GVO - both sides with o-ring
GVOK - one side with o-ring

00 - without special version
01 - 6-kit retaining ring

01 - without special version
02 - 6-kit retaining ring

R - inch

00 - with union nut
KÖ - without union nut

0 - no option
D - pressure relief under follower plate

N00 - without air cap / with nozzle extension
R15 - ring jet 15°
F45 - flat jet 45°
F60 - flat jet 60°
F90 - flat jet 90°
S10 - air cap marking nozzle (8-10°)

00 - 0°
01 - 45°
02 - 90°
03 - 135°
04 - 180°
05 - 225°
06 - 270°
07 - 315°

F00 - no indexing
000 - 0°
045 - 45°
090 - 90°
135 - 135°
180 - 180°
225 - 225°
270 - 270°
XXX - customized specification - 0° to 360°

0 - no option
G - mobile version

LV - long dosing nozzle
LL - adapter Luerlock
G8 - adapter G 1/8"
00 - without nozzle

R - riser pipe
S - riser hose

ED - flat sealing soft

00 - with union nut
KÖ - without union nut

NON - without valve neelde | for nozzle extension
STD - ceramic needle (standard)

0 - without adjustment lock SAVE
S - with adjustment lock SAVE

M - brass
E - stainless steel

M - brass nickel-plated
E - stainless steel (1.4301 / 1.4305)

F - FKM
E - EPDM

ED - flat sealing soft
00 - flat sealing metal

NON - without needle and nozzle
STA03 - nozzle standard 0.3 [mm]
STA05 - nozzle standard 0.5 [mm]
STA08 - nozzle standard 0.8 [mm]
STA10 - nozzle standard 1.0 [mm]
STA15 - nozzle standard 1.5 [mm]
STA20 - nozzle standard 2.0 [mm]
STA25 - nozzle standard 2.5 [mm]
KLS03 - nozzle KLS 0.3 [mm]
KLS05 - nozzle KLS 0.5 [mm]
KLS08 - nozzle KLS 0.8 [mm]
KLS10 - nozzle KLS 1.0 [mm]
KLS15 - nozzle KLS 1.5 [mm]
KLS20 - nozzle KLS 2.0 [mm]
SIG03 - marking nozzle 0.3 [mm]
SIG05 - marking nozzle 0,5 [mm]

0 - without acoustic
A - with acoustic

0 - without
S - float switch
K - capacitive
U - ultrasonic

0 - without options
S - integrated media storage
H - integrated homogenization with media storage
T - tandem version

000 - without options
P00 - pneumatic agitator
POV - pneumatic agitator + valve control
PPV - pneumatic agitator + valve connection + valve control
PP0 - pneumatic agitator + valve connection
E0V - electric agitator + valve control
EPV - electric agitator + valve connection + valve control
0PV - valve connection + valve control
00V - valve control
0P0 - valve connection

E - stainless steel at least 1.4301

0 - without check valve
1 - with check valve

0 - without connection to external emergency stop
1 - with connection to external emergency stop

Minimum €

–

Maximum €